Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SW3000 MONODescription This single wing gate opener is an entry level gate opener ideal to motorized a light single wing swinging gate measuring up to 1,8m 6ft. For those who desire a very uncomplicated gate opener, easy to be installed. Ducati's SW400 actuator that comes in this package is a very short but efficient actuator without telescopic pipe that can be installed on very light and small gates features a modern design, can be installed on both side of the
Description
- This single wing gate opener is an entry-level gate opener ideal to motorized a light single-wing swinging gate measuring up to 1,8m/6ft.
- For those who desire a very uncomplicated gate opener, easy to be installed.
- Ducati's SW400 actuator that comes in this package is a very short but efficient actuator without telescopic pipe that can be installed on very light and small gates features a modern design, can be installed on both side of the gate (no matter if left or right wing).
- Powered by 12V dc motors ensure long-lasting performances in all weather conditions and can work continuously without overheating.
- CTH 41 electronic board delivered in this product is a very simple but reliable electronic board without adjustments: it's all set automatically to ensure a very simple and quick installation for DIY users.
Kit Contents
- 1xSW400 - 400mm stroke linear actuator
- 1x7851Rol - Small control box with electronic board CTH41+ transformer
- 2x 6203Roll - 2 buttons 433 Mhz rolling code transmitters
- 1x SW7500 - blinking light 12V
- 1x SW5000 - key switch
- 1 set of actuators fixing plates
- 1x instruction manual
Features
This classic DUCATI "vintage" design ENTRY LEVEL gate operator features simples and basic functions for an easy installation with no adjustments needed.
AUTO-LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
For those who do not require advanced settings but want a safe, reliable simple gate opener for small gates:
- Highly reliable opener: can work in continuous cycles without overheating
-
Features 2 working mode options: step by step ( push to open & push to close) or automatic closing with fixed pause time 30 sec.
-
Small control unit with integrated toroidal transformer, simple electronic board with on board radio receiver & antenna cable
-
Easy self-storing of the remotes controls by pushing one button
-
Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
-
After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
-
Quick and easy installation
-
The gate is automatically locked in closed position (irreversibile system).
-
Manual release system by universal triangular key
-
CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
-
Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be added to prevent scratches to the painting of vehicles crossing while gate is closing.In compliance with EN norms EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
Technical Data
ELECROMECHANICAL ACTUATOR SW400
| Motor power supply | 12V |
| dc motor | 60W |
| max pushing & power | 1200N |
| Stroke | 400mm |
| motor speed | 1,5 cm/sec |
| telescopic actuator | - |
| working cycles limit | continuous use/ no limits |
| working temperature | -20°C/+50°C |
| max wing length | 2m/6.5ft |
| max.wing weight | 200kg/441lb |
| max. opening angle | 125° |
| automatic wing lock | √ irreversible actuator |
| manual release system | √ by triangular key |
| Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model SW400 in "FC" version are featured with on-board mechanical limits for the open wing position.
CTH41 ELECTRONIC BOARD TECHNICAL DATA
| Main power supply | 230-240V /50-60Hz or (110V/60Hz) (both variant of toroidal transformer are available. Select the desired version while ordering) |
| toroidal transformer's Watts | 105W |
| protection fuse | Automatic |
| transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
| use on single or double wing gate | 2 Wings gate only |
| output services | 12V |
| stand-by power consumption | 8mA |
| radio receiver | 1 channel |
| remote controls channels storage capacity | 10 codes |
| radio transmission protocol | DUCATI rolling code |
| radio frequency | 433,92MHz |
| remote control automatic learning | √ |
| On board antenna | √ |
| external antenna input | - |
| automatic closure working mode | √ with adjustable pause time up to 30 sec. |
| step by step working | √ one pulse to open; one pulse to close |
| motor power adjustment | - |
| Obstacle detection safety system(DUCO SAFE) | obstacle detection |
| In compliance with EU-CE norms | √ |
| timerized courtesy light output | - |
| flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
| electric lock output | - |
| safety beam-photocells input (NC contact) | √ NC normally closed contact |
| A full cycle START input(NO contact) | √ |
| pedestrian cycle START input ( N contact) | - |
| output for optional additional back-up battery charge management & module CMBAT | - |
Manual
CLICK HERE to download the SW400 actuator's installation diagram
CLICK HERE to download the CTH41 electronic board wiring diagram
CLICK HERE to download full swing gate openers installation manual
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy